{"id":2,"date":"2012-05-03T21:27:34","date_gmt":"2012-05-04T02:27:34","guid":{"rendered":"http:\/\/www.myplumcrazychallenger.com\/?page_id=2"},"modified":"2012-07-04T14:58:26","modified_gmt":"2012-07-04T19:58:26","slug":"sample-page","status":"publish","type":"page","link":"http:\/\/www.myplumcrazychallenger.com\/?page_id=2","title":{"rendered":"Shaker \/ TA Hood"},"content":{"rendered":"

Shaker and T\/A Hood by AFR (Autoform Group<\/a>) Is an aftermarket fully functional fiberglass hood that consists of 1) Hood 2) base 3) your choice of hood scoops – shaker – T\/A – ram air type. It’s also the only true shaker hood as it’s forces air directly into the Throttle-body<\/p>\n

The really cool thing about this setup is how easy it is to swap out and change the scoops.<\/p>\n

TA scoop installed <\/strong>(click images to enlarge)
\n<\/strong><\/em><\/p>\n

\"\"<\/a><\/p>\n

Shaker Scoop installed<\/strong><\/p>\n

\"\"<\/a>Open air filter when T\/A scoop is installed<\/strong><\/p>\n

\"\"<\/a>Both scoops share the same base, however I do use a taller air cleaner when using the T\/A scoop.<\/p>\n

\"\"<\/a><\/p>\n

As you can see, the small half moon duct that directs the air from the base to the Throttle-body<\/p>\n

\"\"<\/a><\/p>\n

Here is a picture of what the T\/A scoop looks like off the car and with all it’s parts separated<\/p>\n

\"\"<\/a><\/p>\n

 <\/p>\n

\"\"<\/a>It takes only\u00a0 7 minutes to perform the scoop swap from Shaker to T\/A or T\/A to Shaker<\/p>\n

The most asked question is; are you worried about rain, what do you do when you’re out and it starts raining heavy.\u00a0 The base and air cleaner comes with a rain shield that spins from open.<\/p>\n

\"\"<\/a><\/p>\n

To closed, which helps protect the air cleaner from rain and touch less car washes
\n<\/a><\/p>\n

\"\"<\/a><\/p>\n

Here is a picture of the T\/A scoop installed and the taller air cleaner being used<\/p>\n

\"\"** Note air cleaner shown above (TA scoop installed) uses a taller air cleaner. K&N part number E1290\/E-1300 or Spectre HPR-0351.\u00a0 Also shown is the optional K&N air cleaner cover 11″ diameter sorry no part number available as of this writing<\/span>
\n<\/a><\/p>\n

For more information contact the owner directly about their hoods and other accessories for Dodge Challengers and even Vipers<\/p>\n